PCUT SERIES USER ‘ S MANUAL Safety precautions 1．Safety precautions Definition of warning symbols: Any improper operation possibly results in hazard WARNING of life or damage of equipment。 Any improper operation possibly results in hazard CAUTION of life or other objects。 Definition of sign symbols: The symbol is prepared to arouse operator's highly attention. Operating instructions.14 6.1 Name and functions of parts.14 6.2 Basic operation16 6.3 Operating instructions.19 6.4 Technical features26 7. If they are reversed, you will need to rotate the connector key / shield on the motherboard.įeatures.7 5．USB interface setup9 6. If you are unsuccessful in connecting, contact us on live chat at Special Notes: If you have installed a new motherboard, make sure that left / right and up / down arrows move the carriage left and right and up and down respectively. Flexi Starter is very similar except you will need to go into Production Manager to setup the cutter. Select “Testcut” from the bottom right corner The cutter should connect and cut the test cut path. Use spooler: Unchecked Enable feed dialog after cutting: N/A Optimize datastream: Unchecked Force movement: Unchecked Curve resolution: 100 Rotate: 90 deg RTS and CTS should be checked DTR and DSR should NOT be checked Click “OK” Click the Cut icon (Icon that looks like a pair of scissors) Remove your blade holder from the carriage. If your corners are nice and sharp then the setting is correct.0100″ –.0130″ is a good range to work within.
0 kommentar(er)
